Spare parts
Cone crusher spare parts
Crushing liners and mechanical spare parts for cone-crusher maintenance.
View equipment
Spare parts
Replacement crushing plates and drive components for jaw crushers.
Jaw plates and cheek plates protect the crushing chamber and take the wear from the stone. The spare-parts range also includes pitmans, eccentric shafts, bearings, flywheels and toggle components for mechanical repair. Plate profile, mounting holes and bearing seats must match the installed machine. A model reference and dimensioned drawing help identify the right part.
Request a quotationDesign and operationProduct information
| Fixed and moving jaw plates | Corrugated crushing faces in wear-resistant steel |
|---|---|
| Cheek plates | Protect the sides of the crushing chamber |
| Pitman / swing jaw | Carries the moving jaw plate |
| Eccentric shaft | Produces the jaw movement |
| Flywheels | Store energy through the crushing cycle |
| Toggle plate and seats | Transfer load through the jaw mechanism |
| Bearings | Support the shaft and moving assembly |
Operation and components
Jaw and cheek plates are the main wear components in the crushing chamber. Mechanical servicing also covers the swing jaw, shaft, bearings, flywheels and toggle assembly.
The jaw-plate teeth grip the rock while the moving jaw closes. Plate thickness, tooth profile, mounting holes and seating surfaces must suit the machine. The chamber is checked as a complete set when the plates are changed.
The eccentric shaft drives the moving jaw and the flywheels carry energy through the crushing cycle. Toggle plates and seats transfer the load. These components are matched by model and assembly dimensions.
| Part | Function | Details needed |
|---|---|---|
| Jaw plate | Crushing and gripping surface | Plate dimensions, tooth profile and mounting holes |
| Pitman / swing jaw | Supports the moving plate | Shaft and bearing seats, plate mounting dimensions |
| Eccentric shaft | Drives the jaw movement | Bearing seats, eccentric dimensions and shaft ends |
| Flywheel | Stores energy through the cycle | Diameter, hub bore and drive arrangement |
| Toggle plate and seats | Transfer force | Length, thickness and contact profile |
Check both plates and the chamber profile together. Uneven wear or a mismatched profile can affect how the crusher grips and passes material.
Send the crusher model, photographs from several sides and a dimensioned sketch. Include mounting holes and seating surfaces, not only overall length and width.
Contact
For equipment enquiries, state the material, feed size, required product grading and capacity. For replacement parts, send the crusher model and the part number, drawing or photograph.
+98 912 560 1126Spare parts
Crushing liners and mechanical spare parts for cone-crusher maintenance.
View equipment