Skip to content
ALBORZ CRUSHERMINING EQUIPMENT
Illustration of a hydraulic cone crushing station

Cone crushers

CH430 cone crusher

Hydraulic cone crusher for secondary and tertiary rock reduction.

CH430 works with pre-crushed rock in the secondary or tertiary stage. Its crushing chamber is formed by a mantle and concave, with liner profiles selected for the required duty. Hydraulic adjustment sets the minimum gap between the liners. Suitable feed grading, a steady feed rate and lubrication are needed to keep the chamber and working assembly operating properly.

Request a quotationDesign and operation

Product information

Technical specifications

ModelCH430
Maximum feed size, EC chamber185 mm
Motor power132 kW
Setting adjustmentHydraulic
Typical positionSecondary or tertiary stage

Capacity and product size depend on the feed material, crushing chamber and machine settings. The quotation specifies the supplied configuration.

Features

  • Hydraulic adjustment of the closed-side setting
  • Crushing chambers for coarse through fine feed
  • Replaceable mantle and concave liners
  • Lubrication of the crushing assembly

Applications

  • Secondary reduction of pre-crushed rock
  • Tertiary crushing for finer aggregate
  • Crushing stages in aggregate and mineral processing

Operation and components

CH430 crushing chamber and feed

CH430 can serve the second or third crushing stage. The liner set is selected for the material arriving from the preceding machine.

Discharge adjustment

Hydraulic adjustment changes the closed-side setting. Reducing this gap generally gives a finer discharge and changes the crusher load. In a closed circuit, the screen return must be considered along with the fresh feed.

Feed preparation

Dry, non-sticky feed passes through the chamber more consistently. Controlled feeding and removal of unsuitable fines before crushing help maintain material flow. The selected chamber must suit the actual feed grading.

Crushing chamber designations
CodeChamber profileUsual duty
EC / CExtra coarse / coarseLarger pre-crushed feed
MC / MMedium coarse / mediumIntermediate reduction duties
MF / FMedium fine / fineSmaller feed and finer product
EFExtra fineFine feed in a suitable final crushing stage

Common questions

When is a fine chamber needed?

When the incoming material has already been reduced enough for the smaller chamber opening and the process requires further size reduction. A coarse feed should not be directed into a fine chamber.

Why does the screen affect crusher capacity?

Oversize from the screen returns to the crusher in a closed circuit. That return load is processed alongside fresh feed, so the fresh-feed rate alone does not describe the crusher workload.

Contact

Request a quotation

For equipment enquiries, state the material, feed size, required product grading and capacity. For replacement parts, send the crusher model and the part number, drawing or photograph.

+98 912 560 1126

Fields marked * are required.

We use these details to respond to your inquiry.

Related equipment