Skip to content
ALBORZ CRUSHERMINING EQUIPMENT
Illustration of a complete crushing and screening plant

Other plant equipment

Other plant equipment

Feeding, screening, washing and material handling equipment for crushing plants.

A crushing plant needs a controlled feed supply and a clear route for each product fraction. Feeders regulate the flow into the crusher. Vibrating screens separate the crushed material by size, while sand washers remove unwanted fines where wet processing is required. Conveyors move the material between stages and into storage. Thickeners settle suspended solids in the wash-water circuit.

Request a quotationDesign and operation

Product information

Technical specifications

FeedingRock feeders, grizzly feeders and hoppers
ScreeningMulti-deck vibrating screens
WashingScrew sand washers
Water circuitThickeners
Transfer and storageBelt conveyors and bins

Features

  • Rock and grizzly feeders
  • Multi-deck vibrating screens
  • Spiral sand washers
  • Belt conveyors and storage bins
  • Thickeners for the wash-water circuit

Applications

  • Building crushing and screening lines
  • Adding or replacing plant equipment
  • Sand washing, conveying and stockpiling

Operation and components

Feeding, screening and material handling

Feeders, screens, washers and conveyors connect the crushing stages. Their capacity and discharge arrangement must be coordinated throughout the line.

Feeders and vibrating screens

A hopper receives the feed and a feeder regulates its delivery. Grizzly bars allow undersize to bypass the crusher where the circuit permits. Vibrating screens then divide the crushed material into the required fractions.

Washing and process-water handling

Sand washers remove unwanted fine material during wet processing. The wash-water circuit must account for both solids and water. A thickener settles suspended material, while conveyors transfer the washed or screened product to storage.

Plant equipment and its role
EquipmentMain dutySelection factors
Feeder and hopperStore and regulate incoming feedLargest rock, feed rate and loading method
Vibrating screenSeparate material by sizeRequired fractions, deck area and moisture
Screw sand washerWash and classify sandFeed grading, fines content and water supply
ThickenerSettle suspended solids from process waterSlurry flow and settling characteristics
Belt conveyorTransfer material between stagesBelt width, length, incline and lump size
Storage binHold material before controlled dischargeStorage volume and discharge arrangement

Common questions

Can these units be added to an existing line?

Yes. The existing feed rates, transfer heights and available space must be checked so the new equipment works with the machines already installed.

Does every plant need a washing circuit?

No. Washing is used when the feed and product specification require the removal of clay, silt or excess fines. Water supply, recovery and sludge handling form part of that decision.

Contact

Request a quotation

For equipment enquiries, state the material, feed size, required product grading and capacity. For replacement parts, send the crusher model and the part number, drawing or photograph.

+98 912 560 1126

Fields marked * are required.

We use these details to respond to your inquiry.